@dido_the_dino so yeh I’m waiting 4 the bus rn

@dismemberment hi itz little_alien I got a new account 😆

@dismemberment alright
I’ll try

Update 13.5 - Originality - Major Content Update

Release Date: TBA. Editor lag is being a massive problem currently

What’s new:

UI

Major Revamps to the UI screen to be more clean and modern.

Removed several old songs and replacing them with new music.

This music will be AI generated via Suno’s v5 model. Thus, it won’t be taken from another producer. Some old songs will remain. Overall, there will be less songs in the music rotation. See dev notes for more detailed reasons.

Similar to the Battle Music, the lobby music will see similar changes, but the number of songs will still be the same.

Gamemodes

The following gamemodes have received specification changes

Frontlines

Reduced the number of tickets need to win a score victory to 500. Bug Fixes Fixed a bug where the message of a successful elimination would remain frozen on screen should it appear during the victory chime. I am aware of a bug that causes incorrect collision and roof rendering on some maps despite it being correctly placed in the costume editor. This is currently being investigated. Developer Notes

This update is made to update the UI and make major changes to the music, along with a gamemode change.

First, the UI screen will receive some changes, including button layout and appearance, along with cleaner placement.

For the battle songs, changes have been made to the music rotation to remove low quality and somewhat boring music, add some songs which is more fit for the game’s genre, and overall for general originality. The same will happen for most of the lobby soundtracks. Overall, there will be less soundtracks. Some old songs will still be in the game

For context, all of the new songs will be AI generated using Suno AI’s v5 model. As part of a subscription to access said model, the songs get copyright protections, thus making these new songs the first soundtracks ever to be fully original to the game. These songs will be dropped shortly before the update as Volume 2.

For the Frontlines mode, the amount of tickets needed to win is reduced to 500 to reduce match times. This is targeted to the Standard variant of the gamemode where the only way to win is by tickets.

Lastly some small bug fixes were made as well as an investigation of a bug is underway.

The next update will add a new gamemode.

@notjaldolfyt I’m back
join it

@dreamsmp_luck Fixed it

@sirbots It depends on what you think. I was just commenting like a “book” of anomalies, or anomaly types

@mr-gentlehands thank you

@dido_the_dino crazyy
wear red tmrw me and Rowan are

Added a mini boss: Summoner

(type /summon summoner to spawn it)

https://play.creaticode.com/projects/6730fb66bf68856fe9840816

Please tell me any bugs you find. The launcher might be a bit bugged with summoner, I don’t know how to fix it

@dido_the_dino i made a cool thing on websim that just transports you to a random website-

@notjaldolfyt hi

@jeffreyrb03-gmail
yeah… i forgot about the project part, haha…

@info-creaticode Thank you, I should do that.

@jeffreyrb03-gmail ok 🙂

@black-cat Yes, but you can’t do literal programming. It is just learning

Thanks for the feedback everyone! Looks like this feature is a bit too complicated. We’ll keep the strict requirements for now until we find a better solution.

@jeffreyrb03-gmail said in hi guys i'm heron:

@dreamsmp_luck oooo make sure to drop all the details then to the new principal. Ill provide u screenshots over email

ik this old but should I still tell the principal

@artisilv understood 😆

and here is other link to something i coded
https://studio.code.org/projects/spritelab/mSzdptLnn9mPxnHi7B5vnCBYg0ecxTGT-ucHLvQAh4g/edit

@jeffreyrb03-gmail Ik how http requests work, I hosted two discord bots on my laptop (and I only used chatgpt to learn new stuff, like dot notation and what some api stuff was because I was not gonna dig through the api docs), it seems to load it all via script tags, like I can’t find “About Me” or any content in it via view-source in the body doc, and I’ve found the script file (https://play.creaticode.com/scratch-playground.0f9a92301b4653bde090.js) used with like everything it seems

@白刃の亡霊 thats good 🙂

@the_true_odst in the files app for your chromebook make a new folder, then make three text folders, make sure you have show file extensions on, and rename one to index.html, another to style.css, and another to script.js, I would recommend for this initial setup and for learning the basics of js very quickly, ask an ai about it, Im not saying you should have an ai make it all, but ask it for stuff like what a draw loop is or when to use multiple js files, I think an ai could better explain what Im trying to say in context of a chromebook

@dreamsmp_luck not me

@mod-squadacademy-1bc96c56 creaticode already removes the clone limit, the crash was cus you should not make clones run forever loops without screen refresh especially if you’re going to do a metric ton of calculations every loop to determine what costume that clone should have and what offset it should be at, it’s a good example of how you can remove fencing effectively and the uses of it (I can give link to show it, I Think I had even cleaned up and split code among multiple sprites, I have a bad habit of putting all my code in single sprites unless it’s that much of an inconvenience to do so)

@notjaldolfyt BRUV-
THEY GOT BOTH PROXIES AHHH
mitsuba.png

@011830-0a42ef84 yeah so the issue is likely that multiple broadcasts are being sent per frame, which causes only some broadcasts to work,there is no way around this as far as I know, actually a really scuffed/creative way could be you have each thing add to a list the instructions, and then each clone looks for their clone id in the list and follows that instruction (actually I might do that in my cell game to prevent a bug I’ve found with my black holes)

@selene okay : D

@mod-squadacademy-1bc96c56 Ok! I appreciate the offer and I’m gonna start making turbowarp mods again.

@011830-0a42ef84

Can you please reload the page, and make sure you are logged in, and then try XO again? We have made some improvement to XO, but we are not sure if they would resolve your specific issue. Thanks

@白刃の亡霊 DON’T ASK PLS-
he’s my fav character from total drama (well tdi and TDWT)
my fav from all stars and revenge of the island is Mike :3

@artisilv nah I also sometimes use one lol

@dreamsmp_luck IMG_0633.jpeg

@c I doubt it, it’s a personal computer controlled by my parents by they ARE trying to help me progress my coding career

@白刃の亡霊 hmm maybe

@dido_the_dino it’s fine
and yeah

Major feature added for UI:

Music and SFX volume sliders are now added, you may customize the volume for sound effects and music 😄

@info-creaticode the one time I wanted to do it was when I had a lot of clones that were moving around (basically battling) and I wanted to see some stats, but the say/think bubbles were a bit big and blocked other ones, I tried the timed ones but ended up begrudgingly not displaying it since I didn’t think about using a second forever loop, it could be fine not existing since it’s a minor thing but I thought I would mention it

@mr-gentlehands its in like 3 fps 😭

@jeffreyrb03-gmail So I’m starting it again at 2-PM EST (You may join early if wanted, I just won’t do anything)
here’s the link for the meet thingy: https://meet.zoho.com/cwfx-phq-ori

@lilly_is_cool well, I’m pretty sure there is a feature to put your image, so…

@cattyplayzy I honestly think databases (with the source code hidden of course) would be 1000x easier and more convienient to do.

@cattyplayzy said in How would one implement a swear word/inappropriate message filter in their project?:

How would they get a source code?

also with this, honestly some people need to write their own code. It’s good to take code from others, but when the source code is hidden for something, then you just have to accept that and try to recreate it using what you already know. Unless of course you like reverse engineer something to hack it

@catty yeah prolly lol

@mod-squadacademy-1bc96c56 well you can somewhat do it, it lets them move off the veiwport (which is effectively the screen) even though it’s technically not no fencing it still just lets sprite move out of view of your camera, the only issue is you can move the veiwport and then the sprites that were offscreen can be seen at the edges fo the canvas, but if you don’t move the viewport and use variables for x y (so the canvas border doesn’t affect stuff) you can do that.

I do have a better project for an example of no fencing, instead of just using it to do a grid I use it to let zombie ai’s with a physics body move offscreen (it moves everything when the player moves) and there is no way to tell that they do technically hit hte canvas border’

edit: I think the project I sent was just a bad example cus I used canvas size only so zooming in a lot wouldn’t show you the edges of other blocks when you’re moving a bunch, the canvas size isn’t the size of your screen, it’s how big hte fencing is, canvas size is the fencing size and viewport is the screen size

@thebrickmaster626-f522560b

Please check out the new joystick blocks we have just added:

https://www.forum.creaticode.com/topic/1651/virtual-joysticks-for-user-input

@jeffreyrb03-gmail okay so my current plan is to have it write to the sheet in a specific cell and use an extension in sheets to either copy the raw data (one cell for it all, using join with and some stuff to prevent the data from escaping, if you want to know what I mean then ask) to one cell, and have the user just read all the data and format it on the client, or I can have the user post data to a random place in a receiving sheet and the extension copy’s all the data that the client posted into the sheet

Not a bad idea, not gonna lie. However I feel like it going to Extentions is a bad idea. Maybe we could make a separate category called Community Code so that official Extentions don’t get mixed up.

@dreamsmp_luck

Sure. That’s fine.

@info-creaticode well now that i fixed the problem, it would be cool if this could be added to list of stuff you’ll consider adding or add. Thank you for answering my questions!

@jeffreyrb03-gmail

Thank you for the information. We are working on improving the comment loading process so it is refreshed automatically.

@011830-0a42ef84 oh nvm then i forgot

@info-creaticode ohhhhhhh that makes sense, Ig I’ll finally set a pfp

@dreamsmp_luck i love fnaf sm, i just got a fnaf backpack

This New Ocean 2.0 - Major Content Update

Release date: TBA

What’s New

AI

Finished V1 of the AI The AI can now damage players. The AI will not be visible unless they are within a certain distance of the player. Begun work of adding statistics to different ships Increased the number of bots on the map. Widen the area at which bots spawn by 250% and further increased the distance of which they spawn from each other.

Player

Begun work of adding different statistics to different ships Begun live testing of guided missiles

Buildings

Begun work for settlements to attack enemy ships Added a new building: Port Provides the highest resource rate of any building up to this version, and is the first major resource production building to have defenses.
Statistics Population Growth Rate: 15 Resource Rate: 250 Defense: 3/10

Planets

Added 6 new planet Designs Added 6 new planet surfaces

Sounds

Added voice-lines. Added 6 new soundtracks for fighting enemies

Bug Fixes
There are no bug fixes.

This update is to focus on adding content and testing content.

The AI has played a key part in the game’s development. This version would complete the first working alliteration of the AI.

Since there are different variations of ships the player can use, these ships should have different statistics that should stand out from others. Thus, the Battlecuriser and the Battleship will have their own statistics.

To provide an alternative to machine gun fights, guided missiles will added. During all of 2.0’s live updates, each will mark a new testing stage for these missiles. Expect the game to break or mess up during these live updates.

Introducing the first new building to the game: The Port. For those who want to make a large investment for their settlement, this would be for you! Provides a whopping 250 resources per 5 seconds. It’s also the first major resource building with a form of defense against enemies.

Along with some new planet designs and enemies, this will be one of the few massive updates the game will get.

The next update will be the first live test update of building defenses and guided missiles.

@the_true_odst It is somewhat top down. I suppose you could just alter the general placement to fit your game.

@the_true_odst you use the intended and actual as a back bone, for the gravity you just set the intended x and intended y values at the changing, your gravity was mainly change y by 2 every frame and then change y by negative 2 to go down (from what I remember), you can set the intended y speed to 2 every frame (you dont need to every frame but it would work) and then the same with negative, you wouldn’t use 2 because multiplayer blocks make sprites move slower than if you moved them yourself so you have to retest it

basically, you replace all change y by blocks in your gravity with set intended y speed to a value and test for what they should be

@011830-0a42ef84

This is a fun game.

So let’s solve one problem at a time. To limit the rotation speed, you can try to use a loop to repeatedly rotate the sprite a little bit towards the target’s direction.

Here is a demo project:

play.creaticode.com/projects/67351d4fef35162a42f8bc50

As you can see, in a forever loop, we take 3 steps:

calculate angle difference between current direction and the desired direction normalize that difference to within -180 and 180 rotate for up to the speed limit

This is what you will get as you move the mouse:

speedlimit.gif

@info-creaticode Yes, for example, in one of my old games that I had one scratch, there were so many assets that it was hard to manage, it would be easier in my opinion if you could group them into a folder (by clicking on the side panel to add an AI / paint / random asset, you could also add a folder, or if you could right click an asset and make it into a folder like scratch addons does. 😄

@sirbots The best I can do rn is to just have them shoot at random bots anywhere on the map based on the coordinates on both teams, sadly. It’s still better than randomly firing at stuff

@the_true_odst In This New Ocean, yes. The AI won’t however. It’s already out, just check the Update Log for the game to get the link.

@mr-gentlehands probably

@info-creaticode said in There should be both types of resize:

@011830-0a42ef84

Can you try to describe it? Are you trying to make it an oval? making it larger? Maybe a screenshot?

^
Or record it and go to ezgif.com to make it a gif. 🙂 (make sure it’s short btw)

@info-creaticode Does this mean it is not recommended to use other sites for AI generated images?
If so, what if the match you wanted doesn’t show up on the CreatiCode AI gen site?

@mr-gentlehands alr send link

@info-creaticode It would be rather hard to do so.

This is the best I can do.

Look at the code I provided for reference at the start and study it.

Then, play the game until you get either rainy or cyclonic weather at least twice. On the second attempt, that bug will occur. I can’t really explain it well with words or pictures, its a see it for yourself kinda thing. Once the bug occurs, then it should be more understandable.

@106809nes ok, thanks

@tyller_
my access to readjusted and readable pages has expired 😞
0e3b336a-bb1d-40bd-a8cf-6f53b39dd1ac-image.png

@sirbots

Problem confirmed. It seems this is because this project is getting too big. It is over 145M when exported. You might need to consider using smaller clips or fewer sounds.

@tyller_ I used the wrong operators, and I didn’t have the proper distance variable in the movement scripts.

@tng https://play.creaticode.com/projects/6876fe2f0b2607d8a4fb089c

@tng yep

Update 0.1.3 - Sounds of Glory

Release Date: This Friday

past updates mentioned were not added due to bug reasons

UI

Added sounds to the following weapons

M9 AK-47 M870

Added sounds to the following items

Ammo

Added sounds for the following objects

Trees AI Fixed AI firing frequency to be less than before.

Dev Notes soon.

@jeffreyrb03-gmail THX U SM 🙂

@tyller_

We can confirm the textbox will not handle the \n separated string on iPads as new lines at the moment. It is added to our list for future fixes. Thanks for reporting this issue.

@jeffreyrb03-gmail

If the URL contains any of the 3 keywords like “device”, it will take priority over the actual device info.

We’ll check why it mapped ChromeOS to other.

@info-creaticode oh ok thank you, yeah, when you sign up and in other places too the link is outdated

@011830-0a42ef84
CC said that there are enough mods. And if we’re overwhelmed, they’ll add another one.

@king-cole
i mean… same…

skBIDi sigama

@info-creaticode thx

@tyller_ TYSM

@the_true_odst We may do that. By the way, if you want a PFP, there’s a Scratcher named TechVantage who for a limited time is offering high-quality Canva made PFP’s and banners.

@tyller_ That’s actually a pretty good idea, it fits more with the nature of Scratch and CreatiCode rather than my idea

@mr-gentlehands sorry but i got stuff to do, i have sports and my parents just made me go outside and get sweaty right after I showered, now in the car. I’ll try though

@NotJaldolfYT tell me when u do it

@selene ok I will 🙂

@011830-0a42ef84
Sure!
Watcha want?

@tyller_ It doesnt use GPU acceleration like TensorFlow so it kinda sucks on that part as you have to make up methods to make it go faster and all that are kinda annoying.

For training data, it’s just a lot of sentences and all on random topics from wikipedia

@info-creaticode sounds good

@notjaldolfyt JOIN AHHHH:
https://meet.zoho.com/hncr-mhb-jha

@jeffreyrb03-gmail k

@the-_real-femboy Hi! Welcome to the CreatiCode Forum. For a starter project to learn how to use everything, maybe you can try to code Flappy Bird first?

@tyller_ an example if you wish to use the say block is
https://play.creaticode.com/projects/66f183d22756e7dc16b78d60

@cattyplayzy wdym your,
@info-creaticode said in Some feedback.:

@tyller_

For the coding platform, we will allow users to change their username.

But it seems @jeffreyrb03-gmail is talking about this forum.

mentioning the coding platform, currently all you can change in the coding platform is what the full name block outputs, which would be your display name, since they said they will allow, not already exists, they would let you change the output of the username block, and as long as they add another way to specifically ID a user that doesn’t change then it would be fine, but that way doesn’t exist right now

@info-creaticode Ahhh yes, thats pretty good

@jeffreyrb03-gmail

We will put that on our list. Thank you.

@selene ty ty 😸

@dreamsmp_luck

The other users do not need to sign in.

@catty your welcome! I’m aways able to help!

:Me secretively controlling a government controlled agency:

@info-creaticode Thanks for the clarification 😄

@c In Gandi IDE, last time I checked (And this may now be out of date), only one user can edit a sprite at a time.

@jeffreyrb03-gmail Alright, the update’s out. Feel free to tinker with it as much as you want! The update log post has been edited with the new patch notes if you want to see what’s new.

@011830-0a42ef84 using databases is a tiny bit tricky, but they are basically just tables with strict/enforced columns with types (like number, string, or date) and allow you to store rows in them. It is pretty transaction based kinda like actual databases. For a leaderboard you just need to create a database for a leaderboard, and to get data from it, just display say around 100 rows where a stat like coins is greatest, if you were to show some leaderboard of users with the most coins.

I’ll let you tinker around with that first and if you still need help then I would like to see your code and I’ll give working code. I do have a project that demonstrates how to use a database, you’ll have to look in the code though, and what it does it just check if a password you enter is the correct password by asking the database for the password and then checking if the inputted password is equal to the password from the database:

the project is in unlisted shared so u can see it
https://play.creaticode.com/projects/66f85f2ce228c74a133e1128


Hopefully my project doesn’t confuse you more, but all you have to do is just change it up and delete the stuff leftover from my challenge thingie. Instead of using the database to store one singular piece of text, you can use it to store multiple rows like a table and in the end, you could use that database to make a leaderboard of your own and shows what you want.

The columns it should be storing are (user id), found in Sensing, and then any variables.

@jd131111

Indeed, that’s a good feature to add. Thank you

@011830-0a42ef84

That should be fine. thanks for checking

@amanda-12368f30
Good job, but this isn’t related to the topic.

@jeffreyrb03-gmail
Yeah, but why not just use ChatGPT blocks for that reason?

@julia-4087a191 you could try working off one of these: https://www.forum.creaticode.com/topic/487/2d-sdg-3-care-bots-for-older-persons-difficulty-1
https://www.forum.creaticode.com/topic/471/2d-sdg-12-recycling-quiz-difficulty-1

https://www.forum.creaticode.com/topic/169/3d-a-spinning-earth-difficulty-1

https://www.forum.creaticode.com/topic/169/3d-a-spinning-earth-difficulty-1

https://www.forum.creaticode.com/topic/321/3d-an-alien-dance-party-difficulty-1

@jeffreyrb03-gmail Here is a screenshot from the chatgpt I use.
This site eventually stops the chat bot from talking
05222353-e80e-4390-bd65-fe5970a85d12-image.png
It also works as a challenge:
140d596f-00eb-48ff-a036-d42db02db5f4-image.png

Though, once it think it “wins,” it keeps trying to play the game, which I think was dumb.

a6ed5cff-3cfe-4c1d-bf9a-9143675e6ff8-image.png

0c1d4b1c-29e6-4d1f-bc5d-e730c540b5fd-image.png

@011830-0a42ef84 I was talking about my AI

@tyller_
You know, 1st person CreatiCode VR games isn’t a bad idea… I might try to build an open-source version. Not in school, of course…

@dreamsmp_luck

Great!

@info-creaticode ohhh nevermind, that makes sense

@jeffreyrb03-gmail OMG for real
because no one ever likes him lolol

@notjaldolfyt low quality ahh

@白刃の亡霊 Screenshot 2025-08-18 11.57.54.png

@白刃の亡霊

The broadcast block should be working fine. You can try this simple test:

play.creaticode.com/projects/68b650671f1f6c01bf5cf461?version=1

When the green flag is clicked, it will broadcast the message. And when it is received, the variable will increase by 1. If there is an issue like what you described, you should see the variable increase by more than 1 each time, right?

broadcast.gif

 
To find out the real issue, I suggest you simplify your program to bear minimum, and also try to debug it using the “print” block in the “control” group.

@dreamsmp_luck mb was in a rush lmao

@info-creaticode
ok thank you

@info-creaticode
Alrighty. Thanks!

@lillian159174-255f4598 meh its ok im making a game in creaticode sorry

@tyller_

Thanks for the feedback.

We can confirm there is a small delay in typing on iPad. We will investigate why that is happening.

@amanda-12368f30 said in Can someone please help me:

@black-cat He is helping me but no one is not answering this question: how do you make a advance platformer?

Can you give some more details? Any example game? Is it 2D or 3D? Also, did you try to ask the CreatiCode XO assistant?

https://www.forum.creaticode.com/topic/1103/creaticode-xo-ai-assistant-new-project-design

Also, here is an example that uses 2D physics engine:

https://www.forum.creaticode.com/topic/1037/2d-physics-geometry-bounce-game-difficulty-4

And you can also follow this more complicated tutorial by griffpatch:

@amanda-12368f30 It’s ok

We will post an example project next week for a simple chat room.

@jeffreyrb03-gmail 👍

@info-creaticode
That’s great to hear! Thank you.

@s9205307-810c679a

The example project above has been updated to create 2 clones of each box, and set up the fixed relative position constraint between them.

@info-creaticode I don’t know if that will like stop the user from pressing the green flag and resetting their progress in say, a drawing app. The green flag usually resets things, which is it’s purpose, like resetting widgets and whatnot. However, some method to like give a prompt that says “You have unsaved work in this project, are you sure you want to reset it?” would be good, but i don’t think a hat block would logically make sense for this thing.

@011830-0a42ef84

Please check out this new block:

https://www.forum.creaticode.com/topic/1653/shake-screen

@011830-0a42ef84

You can try to unhide the basic sprite and trigger this stack of blocks manually, and you should see the animations. If you are not seeing the same animation in games, then it must be due to other reasons.

You might want to read about how to debug here and try these techniques:

https://www.forum.creaticode.com/topic/1568/how-to-debug

@jeffreyrb03-gmail thank you guys for adding that in I just saw it gives the full code now

@jeffreyrb03-gmail thanks

@jd131111

Yes. thanks.

@sirbots I can try, and updating to a table I believe does slightly lag, I have a project that I recreated here that uses this method, I have recreated it in 3 different places as a sort of benchmark (code.org, here, nad codeacademy) and I’m pretty sure I got decent fps at like 30 clones on creaticode, I’m fairly certain that 10-15 was no problem, though I can try to find the project (the project does have similar logic to this, checks distance from every other clone, then checks some values per clone to decide what to do)

@sirbots Thank you! 😄

@mod-squadacademy-1bc96c56
You are right but technically, they take up the same amount of space in blocks.

(join(-)((abs(X)))

has join()(), and abs(), takes up 2 blocks

((abs(X))*(-1))

has abs() and ()*() (multiplication), takes up 2 blocks.

In math, --2 =2, —2 = -2, and so on. I guess it’s more of preference on which method to use. Your method is nice since it works with numbers only, but mine mixes strings (the “-”) and numbers which may be a bit weird even though it’s still interpreted as a number (just a negative one).

@tyller_ We’ll look into it!

This issue has been resolved.

@tng oh gosh.