Shows the Creaticode screen when I place DJ in -- "goofy Tower Defense test room"
-
@011830-0a42ef84
Can you define what’s the “first” target? Do you want it to lock at the most front-running target? Or the one with the earliest born time?
In general, you should not use the “point towards [sprite]” block in this case. Instead, you can try to compare all the targets based on your rule, and find out which target is the one you want to point at, then you can save its x/y positions into 2 variables.
Then, in the gun sprite, use the point towards x y in N seconds block.
@info-creaticode I mean the one that is ahead of the other enemies, and if there if one that gets ahead of the one that used to be in front, that enemy will become the “first” enemy
Please help all my projects are 3000+ blocks
-
@info-creaticode I mean the one that is ahead of the other enemies, and if there if one that gets ahead of the one that used to be in front, that enemy will become the “first” enemy
@011830-0a42ef84
In that case, you will need to write some code to check which target sprite is currently the first. One way to do it is to look at how far it has traveled. Since every target starts at the same point, the one that has traveled the most should be the leading one, right?
And assuming each target has a constant speed, you just need to multiply its speed with how long it has been moving to get its total travel distance. The one target with the longest travel distance must be the leading one.
-
@011830-0a42ef84
In that case, you will need to write some code to check which target sprite is currently the first. One way to do it is to look at how far it has traveled. Since every target starts at the same point, the one that has traveled the most should be the leading one, right?
And assuming each target has a constant speed, you just need to multiply its speed with how long it has been moving to get its total travel distance. The one target with the longest travel distance must be the leading one.
@info-creaticode So what I’m getting in simple words is, {enemySpeed}*{timeOnField}={totalDistance}, find the enemy with the highest total distance, and point towards that enemy?
If so, would you then put to variables labeled {firstX} and {firstY}, and use those as the direction the units need to aim?
Please help all my projects are 3000+ blocks
-
@info-creaticode So what I’m getting in simple words is, {enemySpeed}*{timeOnField}={totalDistance}, find the enemy with the highest total distance, and point towards that enemy?
If so, would you then put to variables labeled {firstX} and {firstY}, and use those as the direction the units need to aim?
@011830-0a42ef84
No, you can use
point towards (firstX) (firstY) in (0) seconds
-
@011830-0a42ef84
No, you can use
point towards (firstX) (firstY) in (0) seconds
@info-creaticode Will each sprite require their own variables or can you edit them to where {enemySpeed} and {TimeOnField} can affect individual enemies?
Please help all my projects are 3000+ blocks
-
@info-creaticode Will each sprite require their own variables or can you edit them to where {enemySpeed} and {TimeOnField} can affect individual enemies?
@011830-0a42ef84
There are many ways to do this. For example, you can use a table or list to store all the speed and start time of all sprites.
This might be a good time to ask XO for specific coding suggestions.
-
@011830-0a42ef84
There are many ways to do this. For example, you can use a table or list to store all the speed and start time of all sprites.
This might be a good time to ask XO for specific coding suggestions.
@info-creaticode I’ve tried, but it doesn’t appear when I ask it something. I’ve tried debugging and restarting the chat but it doesn’t work
Please help all my projects are 3000+ blocks
-
@info-creaticode I’ve tried, but it doesn’t appear when I ask it something. I’ve tried debugging and restarting the chat but it doesn’t work
@011830-0a42ef84
That’s strange. Are you trying at school? It might be blocked. Can you share a screenshot?
-
@011830-0a42ef84
That’s strange. Are you trying at school? It might be blocked. Can you share a screenshot?
@info-creaticode
I typed in "how do you make variable on only 1 sprite, and it didn’t showPlease help all my projects are 3000+ blocks
-
@info-creaticode
I typed in "how do you make variable on only 1 sprite, and it didn’t show@011830-0a42ef84
Thank you. We will investigate why this is happening.
-
@info-creaticode
I typed in "how do you make variable on only 1 sprite, and it didn’t show@011830-0a42ef84
This issue has been fixed. You should be able to use XO now.
-
@011830-0a42ef84
This issue has been fixed. You should be able to use XO now.
@info-creaticode It still shows the same issue, it might not be fixed because i’m editing the same game I found the bug in, but I’m not sure.
Or it just only occurs to me
Please help all my projects are 3000+ blocks
-
@info-creaticode It still shows the same issue, it might not be fixed because i’m editing the same game I found the bug in, but I’m not sure.
Or it just only occurs to me
@011830-0a42ef84
Can you post the project link? Also, have you reloaded the page? It will need a reload to pick up the changes.
-
@011830-0a42ef84
Can you post the project link? Also, have you reloaded the page? It will need a reload to pick up the changes.
Please help all my projects are 3000+ blocks
-
@011830-0a42ef84
I get no issue now. Can you reload the browser page and try again? If it is not working, please paste a screenshot again. Thanks
-
@011830-0a42ef84
I get no issue now. Can you reload the browser page and try again? If it is not working, please paste a screenshot again. Thanks
@info-creaticode
I have problems with XO too on the same project, but only when I see inside.
See Inside:
Remix:
Forums Moderator.
Trans girl :3 ~ 14yo
Friendly and sometimes goofy~! -
@info-creaticode
I have problems with XO too on the same project, but only when I see inside.
See Inside:
Remix:
@catty
Thank you. We’ll look into this new error.
-
@info-creaticode
I have problems with XO too on the same project, but only when I see inside.
See Inside:
Remix:
@catty
Actually, XO only works when you are logged in. Can you verify you are logged in when you get the error message?
-
@catty
Actually, XO only works when you are logged in. Can you verify you are logged in when you get the error message?
@info-creaticode
I was logged in as shown in the screenshots.
When I clicked see inside logged out, XO doesn’t pop up. -
@catty
Actually, XO only works when you are logged in. Can you verify you are logged in when you get the error message?
@info-creaticode It also happens every time I load a new project
Please help all my projects are 3000+ blocks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login